Manual: ts_test_mt

TS_TEST_MT(1)						    tslib					       TS_TEST_MT(1)

NAME
       ts_test_mt - A basic multitouch test program for tslib.

SYNOPSIS
       ts_test_mt [OPTION]

DESCRIPTION
       ts_test_mt  is  used to test tslib using ts_read_mt() , see ts_read_mt (3). It can be used for single and multi touch
       devices and lets you test the input behaviour with tslib's filters applied. Two modes are offered by buttons  on	 the
       display:

       In Drag mode, one crosshair for each concurrently made touch contact is drawn to the framebuffer display.

       In Draw mode, lines are drawed for each touch contact.

       -r, --rotate [value]

	   Rotate  the screen. value is 0 for 0 degree, 1 for 90 degrees (CW), 2 for 180 degrees (upside down) and 3 for 270
	   degrees (CCW).

       -v, --verbose

	   Print the input samples' values to the console.

       -j, --slots

	   Override the number of concurrent touch contacts to allocate.

       -i, --idev

	   Explicitly choose the original input event device for tslib to use. Default: the environment variable TSLIB_TSDE‐
	   VICE's value.

       -n, --samples

	   Automatically exit after having read n samples.

       -a, --altcross

	   Show an alternative crosshair symbol at the touch points.

SEE ALSO
       ts.conf (5), ts_calibrate (1), ts_uinput (1), ts_test (1)

													       TS_TEST_MT(1)