Manual: ip-stats

IP-STATS(8) Linux IP-STATS(8)

NAME
ip-stats - manage and show interface statistics

SYNOPSIS
ip stats { COMMAND | help }

ip stats show [ dev DEV ] [ group GROUP [ subgroup SUBGROUP [ suite SUITE ] ... ] ... ] ...

ip stats set dev DEV l3_stats { on | off }

DESCRIPTION
ip stats set
is used for toggling whether a certain HW statistics suite is collected on a given netdevice. The following
statistics suites are supported:

l3_stats L3 stats reflect traffic that takes place in a HW device on an object that corresponds to the given
software netdevice.

ip stats show
is used for showing stats on a given netdevice, or dumping statistics across all netdevices. By default, all
stats are requested. It is possible to filter which stats are requested by using the group and subgroup key‐
words.

It is possible to specify several groups, or several subgroups for one group. When no subgroups are given for
a group, all the subgroups are requested.

The following groups are recognized:

group link - Link statistics. The same suite that "ip -s link show" shows.

group offload - A group that contains a number of HW-oriented statistics. See below for individual subgroups
within this group.

group xstats - Extended statistics. A subgroup identifies the type of netdevice to show the statistics for.

group xstats_slave - Extended statistics for the slave of a netdevice of a given type. A subgroup identifies
the type of master netdevice.

group afstats - A group for address-family specific netdevice statistics.

group offload subgroups:

subgroup cpu_hit - The cpu_hit statistics suite is useful on hardware netdevices. The link statistics on these
devices reflect both the hardware- and software-datapath traffic. The cpu_hit statistics then only re‐
flect software-datapath traffic.

subgroup hw_stats_info - This suite does not include traffic statistics, but rather communicates the state of
other statistics. Through this subgroup, it is possible to discover whether a given statistic was en‐
abled, and when it was, whether any device driver actually configured its device to collect these sta‐
tistics. For example, l3_stats was enabled in the following case, but no driver has installed it:

# ip stats show dev swp1 group offload subgroup hw_stats_info
56: swp1: group offload subgroup hw_stats_info
l3_stats on used off

After an L3 address is added to the netdevice, the counter will be installed:

# ip addr add dev swp1 192.0.2.1/28
# ip stats show dev swp1 group offload subgroup hw_stats_info
56: swp1: group offload subgroup hw_stats_info
l3_stats on used on

subgroup l3_stats - These statistics reflect L3 traffic that takes place in HW on an object that corresponds
to the netdevice. Note that this suite is disabled by default and needs to be first enabled through ip
stats set.

For example:

# ip stats show dev swp2.200 group offload subgroup l3_stats
112: swp2.200: group offload subgroup l3_stats on used on
RX: bytes packets errors dropped mcast
8900 72 2 0 3
TX: bytes packets errors dropped
7176 58 0 0

Note how the l3_stats_info for the selected group is also part of the dump.

group xstats and group xstats_slave subgroups:

subgroup bridge - Various statistics on bridges and their slaves.

suite stp - STP statistics
suite mcast - IGMP / MLD statistics
suite vlan - per-VLAN traffic statistics

subgroup bond [ suite 802.3ad ] - Statistics for LACP traffic on bond devices and their slaves.

group afstats subgroups:

subgroup mpls - Statistics for MPLS traffic seen on the netdevice. For example:

# ip stats show dev veth01 group afstats subgroup mpls
3: veth01: group afstats subgroup mpls
RX: bytes packets errors dropped noroute
0 0 0 0 0
TX: bytes packets errors dropped
216 2 0 0

EXAMPLES
# ip stats set dev swp1 l3_stats on
Enables collection of L3 HW statistics on swp1.

# ip stats show group offload
Shows all offload statistics on all netdevices.

# ip stats show dev swp1 group link
Shows link statistics on the given netdevice.

Manual: ip-stats

Related Commands: