Manual: foo2oak-wrapper
foo2oak-wrapper(1) General Commands Manual foo2oak-wrapper(1)
NAME
foo2oak-wrapper - Convert Postscript into an OAKT printer stream
SYNOPSIS
foo2oak-wrapper [options] [ps-file]
DESCRIPTION
foo2oak-wrapper is a Foomatic compatible printer wrapper for the foo2oak printer driver. This script reads a Post‐
script ps-file or standard input and converts it to Oak Technology OAKT printer format for driving the HP Color
LaserJet 1500 laser printer, Kyocera KM-1636/KM-2035 copiers, and other OAKT-based printers.
This script can be used in a standalone fashion, but is intended to be called from a printer spooler system which
uses the Foomatic printer database.
COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a print job that are usually controlled on a per job basis.
-b bits
Number of bits per plane (1 or 2) [1].
-c Print in color (else monochrome).
-d duplex
Duplex code to send to printer [1].
│ │ │
│ 1 off │ 2 long edge │ 3 short edge
-m media
Media code to send to printer [1].
─────────────────────────────────────
Media HP CLJ 1500 KM-1635
-z0 -z1
─────────────────────────────────────
autoselect 0 0
plain 1 1
preprinted 2 2
letterhead 3 3
transparency 4 4
prepunched 5 5
labels 6 6
bond 7 7
recycled 8 8
color 9 9
cardstock 10 10
envelope 11 11
light 13 na
tough 14 na
vellum na 15
rough na 16
thick na 19
highqual na 20
-p paper
Paper size code to send to printer [1].
┌──────────────────┬─────────────────┐
│ 1 letter │ 3 ledger │
│ 5 legal │ 6 statement │
│ 7 executive │ 8 A3 │
│ 9 A4 │ 11 A5 │
│ 12 B4 │ 13 B5jis │
│ 14 folio │ 19 env9 │
│ 20 env10 │ 27 envDL │
│ 28 envC5 │ 30 envC4 │
│ 37 envMonarch │ 257 A6 │
│ 258 B6 │ 259 B5iso │
│ 260 env6 │ │
└──────────────────┴─────────────────┘
-n copies
Number of copies [1].
-r xresxyres
Set device resolution in pixels/inch [600x600].
-s source
Source (Input Slot) code to send to printer [7].
│ │
│ 1 tray1 │ 2 tray2
│ 4 manual │ 7 auto
-2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
Print in N-up. Requires the psutils package.
-o orient
Orientation used for N-up.
Portrait -op (normal)
Landscape -ol (rotated 90 degrees anticlockwise)
Seascape -os (rotated 90 degrees clockwise)
Printer Tweaking Options
These are the options used to customize the operation of foo2oak for a particular printer.
-u xoffxyoff
Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper
size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
-l xoffxyoff
Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper
size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
-L mask
Send the logical clipping values from -u/-l in the OAKT stream. foo2oak-wrapper always runs Ghostscript with
the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer
has unprintable regions. This option is used to move the position of the clipped image back to where it be‐
longs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in
most cases.
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts
-z model
Model is 0 for the HP Color LaserJet 1500, and 1 for the Kyocera KM-1635/KM-2035 copiers. The default is 0.
Color Tweaking Options
These are the options used to control the quality of color output. Color correction is currently a WORK IN PROGRESS.
-g gsopts
Additional options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc. This option may appear more than
once.
-G profile.icm
Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and adjust the
printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).
-G gamma-file.ps
Prepend gamma-file.ps to the Postscript input to perform color correction using the setcolortransfer Post‐
script operator. For example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
-I intent
Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute. Default is
0 (perceptual).
Debugging Options
These options are used for debugging foo2oak and its wrapper.
-S plane
Output just a single color plane from a color print and print it on the black plane. The default is to output
all color planes.
1 Cyan
2 Magenta
3 Yellow
4 Black
-D level
Set Debug level [0].
EXAMPLES
Create a monochrome OAKT stream from a Postscript document, examine it, and then print it using a RAW print queue:
foo2oak-wrapper testpage.ps > testpage.oak
oakdecode < testpage.oak
lpr -P raw testpage.oak
Create a color OAKT stream from a Postscript document:
foo2oak-wrapper -c testpage.ps > testpage.oak
FILES
/usr/bin/foo2oak-wrapper
SEE ALSO
foo2oak(1), oak(1)
AUTHOR
Rick Richardson
http://foo2oak.rkkda.com/